Bits from all around the world

Posted on August 16th, 2014 in Materials,Opinion,Suspension,Technologies,Turbocharging by Julian Edgar

I’ve written before about the enormous range of automotive parts now available through eBay, but until I have been working on my little Honda, I’d never realised how well developed such a part-sourcing network it now is.

As I write this morning, I am watching the tracking on my DHL express package that contains the stainless steel gasket set for my turbo. The package, in the last three days, has been through five countries. It started off in Latvia, went then to Lithuania before reaching Germany. Then it travelled to Heathrow airport in London, before arriving (this morning at 2.20 am) in Sydney. Out in country New South Wales, I reckon I’ll get it in the next few days.

And the exhaust gaskets are not alone in having travelled far.

My Bosch fuel pressure regulator came from the US, the fuel rail adaptor from the UK. Also from the UK came carbon fibre sheet for making a new dash panel, and replacement ignition coils. Other stuff direct from the US has included oil temperature and pressure sensors, the boost control solenoid and a water/air intercooler pump.

From China there has been a host of parts – the front-mount radiator for the water/air intercooling system, fittings, hose clamps, hose joiners and rubber grommets. On its way now from China are a thermocouple adaptor board, a weld-on bung for the thermocouple, and the thermocouple itself.

And of course I have bought plenty of parts locally.

With the fast availability of parts, cheaper than ever before, from all around the world, there’s never been a better time to be modifying cars…

Wrecking yards are better than ever!

Posted on August 8th, 2014 in Engine Management,Materials,Opinion,Suspension,Turbocharging by Julian Edgar

I’ve always loved going to car wreckers, looking at the bits and pieces available so cheaply and wondering how I can integrate them into my car.

I started visiting wreckers when I had my first car – a 1973 Honda Z. That was way back in the early Eighties. I remember looking through the field of dismembered wrecks, finding dash parts from Honda Civics that I could shoehorn into the Z. I even integrated the high beam flash stalk from a Datsun 260Z into the little Honda.

Time passed, and I was then looking at wreckers importing Japanese engines and transmissions…. That led to a turbo 660cc 3-cylinder engine going into my Daihatsu Handi, and later an RB20DET turbo six going into a C210 Skyline.

I have been musing over this because in the last month I’ve been spending a lot of time back in wrecking yards.

I’m lucky enough to have discovered a wrecker of the old school, one that lets you wander around the yard of cars, spanner and pliers in hand, able to take off whatever parts you want and then take them to the front counter to have them priced.

But the big difference now is this: with modern hi-tech cars having been around for literally decades, the sheer variety of the parts that you can buy is amazing.

Need an idle speed control valve (as I did the other day)? Well, at this yard you can chose between Bosch (three types), Nissan, Toyota, Holden, Ford, Mazda – basically, every car in the yard has an idle speed control valve!

After half an hour of browsing, I walked out with a Bosch idle speed control valve from a BMW, complete with plug and a short section of loom. Cost? AUD$33.

Need a factory bracket on which to mount a GM MAP sensor? Sure – look under the bonnets of not only GM cars but also Daewoos. Cost? In this case, I was charged nothing!

Want some direct fire ignition coils? Would you like those coil-on-plug or remote-mounted? After a long look, I decided instead to go brand new with some Bosch coils – but the browse through the yard showed some very interesting approaches.

Need some 19mm hoses, preformed with bends to plumb a turbo blow-off valve? An hour later I walked out with no less than nine of them – all different lengths and bend radii. Cost? AUD$11. Oh yes, and that also included a rubber mount for the idle speed control valve that I’d forgotten to get earlier!

If you’ve not been to a wrecking yard for a long time, find a good one and have a long look around. You might be as surprised as I was.